SURFACE PREPARATION
- To ensure proper adhesion of the product have to the surface be cleaned from dust, grease, oil, peeling old paint, rust, mold or moisture.
- Apply the product on surface
- When It dries, sand the surface with thin sandpaper and clean it, making it ready for the top coat.
- The product has all the mechanical strength after 20-30 days
APPLICATION CONDITIONS
Do not apply at temperatures below 6°C and above 40°C and at relative humidity above 80%. Adverse conditions in the application can alter the final properties of product.
APPLICATION TOOLS
- Brush
- Roller
- Airless spayer
During working keep tools "liquid" in the container or the container with the product. Drain well the product of the tools back in the box and clean immediately with nitro solvent. If product dries only with strong detergents. Do not empty washings into the groundwater.
8-12m2 / Lt per coat
10 - 15% nitro thinner
10 - 15 min depending on applying conditions
Download the technical data sheets of the product: TDS DOWNLOAD