SURFACE PREPARATION
- To ensure proper adhesion of the product, surfaces must be clean, dry and free from all defective and poorly adhering material, dust, grease, oil, rust, mold or moisture etc.
- Prime the surface with Life dur solvent based undercoat and let it dry for 1 - 2 hours.
- Apply a coat MONOSTOP and let it dry for 24 hours.
- Apply the second coat crosswise after the first one has dried.
- The product has all the mechanical strength after 20-30 days
APPLICATION CONDITIONS
Do not apply at temperatures below 6°C and above 40°C and at relative humidity above 80%. Adverse conditions in the application can alter the final properties of product.
APPLICATION TOOLS
- Brush
- Roller
During working keep tools "liquid" in the container. Drain well the material of the tools back in the box and clean immediately with warm water and soap. If material dries only with strong detergents. Do not empty washings into the groundwater.
1,5 - 2m2 / Lt on properly prepared surfaces
First coat: 10% water. Second coat without dilution
2 - 3 hours depending on applying conditions. Recoat after 24 hours
Download the technical data sheets of the product: TDS DOWNLOAD