UNDERCOATS-PRIMERS - PRIMER (anticorrosive metallic surfaces undercoat)

espa

Products ››

UNDERCOATS-PRIMERS

PRIMER (anticorrosive metallic surfaces undercoat)

Code: 15

High quality undercoat with great anticorrosive properties. It protects all the metallic surfaces and prepares them for the top coat. It is drying quickly and resists in high temperatures (up to 100°C). It is suitable for automobiles, banisters, radiators and every surface sensitive to corrosion.


SHADES: Available in white, black, grey and oxide red  (colourcard)

PACKAGES: 375ml, 750ml, 2.5Lt, 9Lt


SURFACE PREPARATION

- To ensure proper adhesion of the product, surfaces must be clean, dry and free from all defective and poorly adhering material, dust, grease, oil, rust, mold or moisture etc.

- Apply the product with brush, roll or spray gun and let it dry for 20 - 40 min.

- Sand with an appropriate abrasive paper to produce a smooth surface, making the surface ready for the top coat.

- The product has all the mechanical strength after 20-30 days

APPLICATION CONDITIONS

Do not apply at temperatures below 6°C and above 40°C and at relative humidity above 80%. Adverse conditions in the application can alter the final properties of product.

APPLICATION TOOLS

- Brush

- Roller

- Spray gun

During working keep tools "liquid" in the container. Drain well the product of the tools back in the box and clean immediately with White spirit. If product dries, clean only with strong detergents. Do not empty washings into the groundwater

10-12m2 / Lt on properly prepared surfaces

1 - 5% White spirit

20 - 40 min depending on applying conditions

Download the technical data sheets of the product: TDS DOWNLOAD