UNDERCOATS-PRIMERS - ΜΟΝΟ SMOKE - WATER BASED (water based stain block undercoat)

espa

Products ››

UNDERCOATS-PRIMERS

ΜΟΝΟ SMOKE - WATER BASED (water based stain block undercoat)

Code: MNSM

White water based acrylic sealant for the hiding and the isolation of surfaces that “add” stains to the final coat. It isolates smoke, nicotine, old moisture, mould etc. After applying mono smoke water we can paint with every emulsion paint or synthetic enamel without having stain problems in the final coating.


SHADES: Available in white 

PACKAGES: 750ml, 2.5Lt


SURFACE PREPARATION

- To ensure proper adhesion of the product, surfaces must be clean, dry and free from all defective and poorly adhering material, dust, grease, oil, rust, mold or moisture etc.

- Apply the product with brush, roll or spray gun and let it dry for 1 - 2 hours.

- Apply the top coat.

- The product has all the mechanical strength after 20-30 days

APPLICATION CONDITIONS

Do not apply at temperatures below 6°C and above 40°C and at relative humidity above 80%. Adverse conditions in the application can alter the final properties of product.

APPLICATION TOOLS

- Brush

- Roller

During working keep tools "liquid" in the container. Drain well the product of the tools back in the box and clean immediately with warm water and soap. If product dries, clean only with strong detergents. Do not empty washings into the groundwater

15-20m2 / Lt on properly prepared surfaces

5 - 10% water

30' depending on conditions

Download the technical data sheets of the product: TDS DOWNLOAD