PRODUCTS FOR EXTERNAL THERMAL INSULATION - POLYGLUE BAG (resinous, fiber reinforced adhesive cementitious mortar)

espa

POLYGLUE BAG (resinous, fiber reinforced adhesive cementitious mortar)

Code: PGBAG

Resinous, fiber reinforced adhesive cementitious mortar. Used as an adhesive and basic coating for bonding and coating (reinforced with fiberglass mesh) plates expanded (EPS), extruded polystyrene (XPS), Graphite polystyrene and mineral wool.

Package; 25kg poke

For proper use of the product should the coating surface be cleaned from dust, grease, oil, paint, loose materials etc.
1)Mix the adhesive POLYGLUE with cold clean water in a clean container, using a low speed mixer ( <600 rpm="" p="">

2) After the mixture was homogenized leave 5-10 minutes to mature and stir again.

3) Apply with a trowel for spot welding or spatula continuous welding polystyrene plates or normalization.

For the agglutination isolation plates 4-5Kg/m²
For flatten 4.5 Kg/m²

2 hours in the can

5 - 10 min

Download the technical data sheets of the product: TDS DOWNLOAD