SURFACE PREPARATION
- To ensure proper adhesion of the product, surfaces must be clean, dry and free from all defective and poorly adhering material, dust, grease, oil, rust, mold or moisture etc.
- Apply the product with brush, roll or spray gun and let it dry for 20 - 40 min.
- Sand with an appropriate abrasive paper to produce a smooth surface, making the surface ready for the top coat.
- The product has all the mechanical strength after 20-30 days
APPLICATION CONDITIONS
Do not apply at temperatures below 6°C and above 40°C and at relative humidity above 80%. Adverse conditions in the application can alter the final properties of product.
APPLICATION TOOLS
- Brush
- Roller
- Spray gun
During working keep tools "liquid" in the container. Drain well the product of the tools back in the box and clean immediately with White spirit. If product dries, clean only with strong detergents. Do not empty washings into the groundwater
10-12m2 / Lt on properly prepared surfaces
1 - 5% White spirit
20 - 40 mind depending on the conditions
download the technical data sheets of the product: TDS DOWNLOAD