SURFACE PREPARATION
- To ensure proper adhesion of the product the surface have to be cleaned from dust, grease, oil, rust, mold or moisture etc.
- Sand with an appropriate abrasive paper to produce a smooth surface and apply a coat of product without dilution
- Let to dry and apply after 1-2 hours the second coat
- The final colour of the wood depends on the physical colour and absorption of wood and the number of coats applied
- The product acquires all its mechanical strengths after 20-30 days
APPLICATION CONDITIONS
Do not apply at temperatures below 6°C and above 40°C and at relative humidity above 80%. Adverse conditions in the application can alter the final properties of product.
APPLICATION TOOLS
- Brush
- Roller
During working keep tools "liquid" in the container. After use clean well the tools with warm water and soap. If product dries only with strong detergents. Do not empty washings into the groundwater.
8-10m2 / Lt per coat
Ready to use
1 - 2 hours depending on applying conditions
download the technical data sheets of the product: TDS DOWNLOAD