SURFACE PREPARATION

- To ensure proper adhesion of the product, surfaces must be clean, dry and free from all defective and poorly adhering material, dust, grease, oil, rust, mold or moisture etc.

- For new or porous surfaces apply first the recommended undercoat of product (Life dur, Life dur water)

- Stir well the product and apply on 2 coats

- The product has all the mechanical strength after 20-30 days

APPLICATION CONDITIONS

Do not apply at temperatures below 6°C and above 40°C and at relative humidity above 80%. Adverse conditions in the application can alter the final properties of product.

APPLICATION TOOLS

- Brush

- Roller

- Spray gun

During working keep tools "liquid" in the container. Drain well the product of the tools back in the box and clean immediately with warm water and soap. If product dries, clean only with strong detergents. Do not empty washings into the groundwater.

8-12m² / Lt per coat

First coat: 15% water. Second coat: 5-10%  water

1 - 2 hours depending on applying conditions

Download the technical data sheets of the product: TDS DOWNLOAD