SURFACE PREPARATION

- To ensure proper adhesion of the product have to the surface be cleaned from dust, grease, oil, peeling old paint, rust, mold or moisture.

- Mix the components A and B in a ratio 4:1 by volume stirring continously.

- Dilute the mixture with epoxy thinner up to 5%

- Apply a coat of the product. If you want to increase the adhesion of the coating, add quartz sand at a rate of 10-20% by weight.

- The mixture can be used for about 24 hours.

- The product has all the mechanical strength after 20-30 days 

Attention: If we mix components A and B the product can't be stored for future use. 

APPLICATION CONDITIONS

Do not apply at temperatures below 6°C and above 40°C and at relative humidity above 80%. Adverse conditions in the application can alter the final properties of product.

APPLICATION TOOLS

- Brush

- Roller

- Airless spayer
During working keep tools "liquid" in the container or the container with the product. Drain well the product of the tools back in the box and clean immediately with epoxy thinner. If product dries only with strong detergents. Do not empty washings into the groundwater.

10-12m² / Lt per coat

5% epoxy thinner

Complete drying time: 7 days /  20⁰C

Time patency: 1 day /  20⁰C

Download the technical data sheets of the product: TDS DOWNLOAD