SURFACE PREPARATION
- To ensure proper adhesion of the product have to the surface be cleaned from dust, grease, oil, rust, mold or moisture etc.
- In old varnished floor, sand with an appropriate abrasive paper to produce a smooth surface
- Apply on surface the recommended undercoat of product. (Wood care-w)
- Stir well the product and apply a coat. After 6 hours apply the second coat
- The product has all the mechanical strength after 20-30 days
APPLICATION CONDITIONS
Do not apply at temperatures below 6°C and above 40°C and at relative humidity above 80%. Adverse conditions in the application can alter the final properties of product.
APPLICATION TOOLS
- Brush
- Roller
- Spray gun
During working keep tools "liquid" in the container. After use clean well the tools with warm water and soap. If product dries only with strong detergents. Do not empty washings into the groundwater.
10-15m2 / Lt per coat
First coat: 5 - 10% water
Second coat: without dilution
3 - 4 hours depending on applying conditions
Download the technical data sheets of the product: TDS DOWNLOAD