Attention. The underfloor heating must be switched off 12 hours before the application.Before the application must be wetted substrate.
- Depending on the hardness and type of soiling the product F-24 BETON CLEAN used as such or diluted with water in a ratio of 1:5 and applied to the surface.
- Use a brush, by hand or mechanically until dissolved dirt. DO NOT LET IT DRY. After cleaning removes residual dirt with sponge or with water absorber. Let it dry. On absorbent substrates such as natural stone, concrete, etc. recommended to apply a appropriate protective product, In combination with the cleaning and drying the substrate.
- In construction tools, concrete mixers, construction tools (shovel, trowel, etc.) cleaning is done by hand by dipping in an aqueous solution of 1 part F-24 BETON CLEAN with 3-5 parts water and leave for 4-6 hours End Rinse thoroughly with clean water.
DO NOT USE FOR sensitive to acids tiles and slabs, polished natural stone, enamel, concrete, etc. Materials such as aluminum, chromium, iron, inox must be covered or moved before application. Ventilation required. Before applying, it is recommended that is tested.
100-200 ml /m2
It is delivered in plastic containers of 500ml, 1Lt, 4Lt
Download the technical data sheets of the product: TDS DOWNLOAD