SURFACE PREPARATION
- To ensure proper adhesion of the product the surface must be cleaned of dust, grease, oil, peeled old paint, rust, mold or moisture residue.
- Apply the product directly on the surface
- Clean with a mild cleaner 5 days after the completion of the painting
- The product acquires all its mechanical strength after 20 - 30 days.
APPLICATION CONDITIONS
Avoid applying the product at temperatures below 6 ° C and above 40 ° C and when the relative humidity is greater than 80%. Adverse conditions during application may alter the final properties of the product.
IMPLEMENTATION TOOLS
- Brush
- Roll
Keep the tools "wet" in the container during the work. Drain the product well from the tools and clean them with water. If the product dries, leave only with strong detergents. Do not empty the washing liquids into the aquifer.
12-15m2 / lt on properly prepared surfaces.
1-5% water.
1 - 2 hours depending on the application conditions.