SURFACE PREPARATION
- To ensure proper adhesion of the product, surfaces must be clean, dry and free from all defective and poorly adhering material, dust, grease, oil, rust, mold or moisture etc.
- Apply on surface the recommended undercoat of product (Primer, Chassis coat, Velatura)
- Stir well the product and apply on surface
- The product has all the mechanical strength after 20-30 days
APPLICATION CONDITIONS
Do not apply at temperatures below 6°C and above 40°C and at relative humidity above 80%. Adverse conditions in the application can alter the final properties of product.
APPLICATION TOOLS
- Brush
- Roller
During working keep tools "liquid" in the container. Drain well the product of the tools back in the box and clean immediately with Water. If product dries, clean only with strong detergents. Do not empty washings into the groundwater
12-15m2 /lt on properly prepared surfaces
5-10% water
1-2 hours depending on the application conditions.