SURFACE PREPARATION

- Clean the surface from dust, grease, oil, peeling old paint, rust, mold or moisture.

- Surfaces must be clean. Usually CHROMOKOL is applied in one of the two surfaces by brush, roller, spatula etc. Afterwards the surfaces get into contact by a common or hydraulic press. Pressing time depends on the temperature and the relative humidity of the environment, the type and the moisture of wood and the mode of pressing. Ideal temperature 25-30 C. After use the container must be closed firmly and the tools cleaned with water before dry.

APPLICATION CONDITIONS

Do not apply at temperatures below 6°C and above 40°C and at relative humidity above 80%. Adverse conditions in the application can alter the final properties of product.

APPLICATION TOOLS

- Spatula

- Roller

- Brush

After work clean the tools with warm water and soap. Do not empty the washing liquid into the groundwater

10 - 20 min depending on applying conditions

30 - 60 min depending on applying conditions and the thickness

200gr, 450gr, 1Kg, 3Kg, 15Kg

Download the technical data sheets of the product: TDS DOWNLOAD