UNDERCOATS-PRIMERS - LIFE DUR SILICON WATER (silicon water based primer)

espa

Products ››

UNDERCOATS-PRIMERS

LIFE DUR SILICON WATER (silicon water based primer)

Code: 24

Transparent silicon water based primer for walls with great adhesion and high penetration for internal and external use. It is the most suitable material for priming of surfaces that are to be painted with silicon based acrylic or emulsion paints. It allows the wall to “breathe” taking out the moisture, but prohibiting it to penetrate. It must be used only on new surfaces, or on those that are painted with silicon based paint, because it losses the property of breathing, if it is applied on traditional paints.


SHADES: Available in transparent

PACKAGES: 1Lt, 5Lt


SURFACE PREPARATION

- To ensure proper adhesion of the product, surfaces must be clean, dry and free from all defective and poorly adhering material, dust, grease, oil, rust, mold or moisture etc.

- Apply the product with brush or roll and let it dry for 1 - 2 hours.

- Apply the top coat.

- The product has all the mechanical strength after 20-30 days

APPLICATION CONDITIONS

Do not apply at temperatures below 6°C and above 40°C and at relative humidity above 80%. Adverse conditions in the application can alter the final properties of product.

APPLICATION TOOLS

- Brush

- Roller

During working keep tools "liquid" in the container. Drain well the product of the tools back in the box and clean immediately with warm water and soap. If product dries, clean only with strong detergents. Do not empty washings into the groundwater

15-20m2 / Lt on properly prepared surfaces

50 - 100% water

1 - 2 hours depending on conditions

Download the technical data sheets of the product: TDS DOWNLOAD